Enquiry Form
 SolarHeat
 SolarPower
 Underfloor Heating
 Heat Pumps
 LED Lighting
 Electric Vehicles

Fast Connect for Samsung EHS

Fast Connect for Samsung EHS

Take The Worry Out Of Your Samsung Heat Pump Installation

There so many things to take into account when installing an air source heat pump;
‘How do I plumb up the low loss header?’
‘Where do I put the wires for the room stat?’
‘How big does the circulation pump have to be?’
…..the list goes on….


Why not take all of the stress away and use a SAMSUNG Fast Connect Board!

  • Pre-Plumbed
  • Pre-Wired
  • Pre-Programmed

All of the benefits without the hassle!


The Fast Connect board from Spire Renewables has been built from the ground up to make your installation as trouble free as possible. By pre wiring and pre plumbing only the best components from manufacturers such as Orkli, Wilo, and Elterm you can rely on the fact that not only will the Fast Connect board take the worry out of your installation, it will also provide worry free operation for years to come. Also, as all controllers are pre programmed by a Samsung Specialist Engineer, you can be rest assured that efficiency is at the heart of the setup.

 

 

 

 Component List

  • 1x Samsung EHS MIM-03AN Control Box
  • 1x 16amp Single Phase Isolator
  • 1x Samsung Cylinder Sensor
  • 1x 40kW Low Loss Header
  • 2x Wilo 7.5m Head Pumps
  • 2x Orkli 2-Port Valves
  • 1x Flow Meter
  • 1x Ball Filter & Shut-Off Valve
  • 4x Pump Shut Off Valves
  • 1x Flush and Fill Points
  • 1x Easy to Follow Manual
 
You can navigate above
between our divisions.