Primos 600

2 electronic control output, control signal configurable by software between PWM-digital signal approx. 10V, and analogue signal 0-10V, +/-3%
Connections: Screw-type terminals, connectors grid 5,0mm

1 relay output with potential-free make contact, also suitable for protective low voltage, max. 250V AC /1A
Connections: Screw-type terminals, connectors grid 5,0mm

Temperature difference controller with multiple system diagrams, 1 - 2 collectors, 1 - 2 storage tanks
Real time clock
Re-cooling function (holiday mode)
Loading time storage tank
System protection
Collector protection
Pump protection
Anti-freeze protection
Recording solar radiation
Energy yield measurement
adjustable control time during o. while priority charging
Loading of second-tier storage tank with logical
backspace to prior storage tank (holding time adjustable)
Parallel charging of storage tanks
Heat exchanger protection
Target temperature operation
“Shut-off pool” (storage tank can be deactivated)
Parallel pump operation
Drain-Back function
RPM control
Sensor monitoring
Manual operation
Flow monitoring
Tube collector with adjustable enable time slot
Acoustical error indications
4 Multifunction controller packages (Heating, Cooling, delta T, free sensor selection, 12 adjustable time slots for additional functions)
Data logging with recording function
System specific parameter setup
Firmware update
Possibility of controllers networking
Remote visualisation from any distance (conexio)
Remote control

1 piece controller device, sequential packing
1 piece user manual, English
1 data CD-Rom (contains controller specific additional information)
1 piece assembly kit
2 piece PT1000 Store sensor, with PVC-cable, length 2000mm, brass sleeve 6x25mm
2 piece PT1000 Collector sensor, with silicon cable, length 1500mm, brass sleeve 6x25mm

Housing Material	100% recyclable ABS housing
Dimensions L x W x D in mm	176 × 162 × 44
Protection class	IP30 according to DIN 40050, EN 60529
Operating voltage:	AC 230 voltage, 50 Hz, –10 to +15%
Power consumption	< 2 W
Max. line cross-section for 230 V connections	2.5 mm² finely stranded/single core
Inputs 1–4 (protected by varistors)	For temperature sensors PT 1000 (1 kΩ at 0 °C)
Other inputs	VFS (Vortex flow sensor)
Measuring range (temperature)	–30 °C to +250 °C
Interfaces	RS 485 for Prozeda bus
Output R1 - R3	Electronic semiconductor relay (Triac) with zero-cross switch, opto-decoupled, 230 V AC, 50 Hz, min. 10 mA, max. 150 W, with cos ϕ >=0.9
Total output of all outputs	Max. 300 W
Output R0	Relay, potential-free normally open contact, max. 250 V AC / 1 A, also suitable for protective extra-low voltage
Control output for HE pump	PWM signal: 1kHz, ViL < 0.5 V DC, ViH > 9 V DC, 10 mA max. Analog signal: 0 - +10 V DC +/– 3%, 10 mA max.
Display	Backlit LCD display
Type 1 action	Type 1.B and type 1.Y
Software class	A
Protection	Microfuse 5 × 20 mm, 2 A/T (2 ampere, slow)
Ambient temperature:	0 to +40 °C
Storage temperature	-10 to +60 °C

This product does not have any associated images.